First, you can view the.
Improving Network and System Performance
You can improve performance by optimizing your network settings, protocols, and workstation configuration. ACS Technologies® recommends the following for optimal performance:
- Set the share for the HMaster directory and subdirectories to Full Control. Set the NTFS permissions to Full Control.
- Use only TCP/IP protocols. You can use DHCP or static IP addresses.
- Set full duplex connections to work with switches and half duplex connections to work with hubs.
- Set the paging file to at least 12MB higher than the physical RAM.
Mapping Network Drives
You can set up your Windows® 2000 and Windows® XP operating systems as peer-to-peer networks. If you choose to use the Windows 2000 or Windows XP servers as workstations, you can map them to the root of the drive where the HMaster directory is located or map directly to the HeadMaster directory. If mapping directly to the HeadMaster folder, make sure that the server’s mapped drive is consistent with others. For example, the server will need to be mapped back to itself.
Peer-to-peer networks are supported only for very small networks (less than five workstations).
You can map to the root of the HMaster directory. For security reasons, you can create a partitioned drive with only the HMaster directory on it.
HeadMaster has been designed to take advantage of the client-server processing capabilities in Windows 2000 and Windows 2003 Server. While HeadMaster can be installed on a file server, we recommend a Microsoft 2000 or Microsoft 2003 server for most network installations of HeadMaster.
- 100 Base T network connection
- Category 5 or 6 UTP (Unshielded Twisted Pair) network cable
UNC (Universal Naming Convention)
HeadMaster does not support UNC even though Windows 2000 and Windows XP support it. The drive or directory on the server where HeadMaster is installed must be mapped as a logical drive.